Spill Air Vac-HEPA 15 gal – 100 cfm cyclone ATEX-CA

The Spill Control Air Vacuum (SPAV) is a pneumatic power head fitted to a stainless steel 15 GALLON/60 litre drum secured to a trolley platform. The air consumption/model for combustible dusts and explosive wet and dry waste starts at 100 cfm for high air flow and extended suction hoses. This unit is fitted with a HEPA filter on the exhaust to filter down toxic air borne particles down to .03 microns @ 99% efficiency.

High powered industrial dry vacuum WITH CYCLONIC SEPARATOR.

Spillrite EX models have no ignition source, no heating element and will not cause sparking when in operation. Power head is constructed from powder coated alloy and when atop the steel drum and placed on the ground and connected to the supplied earth grounding strap any static charge will dissipate into the ground or through the anti-static suction hose.

The latest combustible dust vacuum from Spillrite Vacuums CA is the the SPAV/15/HEPA/100/Cyclone.

With cyclonic separator and equipped with HEPA filtration is this model. Built on a stable and strong aluminium frame measuring 1220 mm long x 610mm wide and 1060mm high.

These units have been designed to be intrinsically safe in the following environments - Class I, Class II, & Class III environments, divisions 1&2.

Spillrite EX models have no ignition source, no heating element and will not cause sparking when in operation. Power head is constructed from powder coated mild steel and when atop the steel drum and placed on the ground or trolley and connected to the supplied earth grounding strap any static charge will dissipate into the ground or through the anti-static suction hose.

Platform trolley AS units have grounding chain from the metal trolley and the stainless steel drums are grounded to the trolley.

Platform trolley AS units have grounding chain from the metal trolley and the stainless steel drums are grounded to the trolley.

The platform trolley is made from a light metal frame which helps to allow Electro static dissipation (ESD) from the unit via a chain to the ground.

  • Length 1220mm
  • Width 660 mm
  • Height 990mm
  • Weight 45 kg

The pneumatic power head sits on top of 15 GALLON/60 litre stainless steel drum. The filtration is a two stage system that includes the cyclone mounted on a second 60 litre stainless steel drum. The SPAV uses a standard weave filter cartridge. When the SPAV is connected to the cyclone the separation is approximately 99% into the cyclone drum and 1% into the Cyclone drum allowing far longer running times and less filter cartridge cleaning.

What is a cyclone and how does it work?

A cyclone is a device that helps to separate the dust particles from the main vacuum air stream and forces the particles down and into a collection drum and thereby preventing the majority of dust particles from travelimng through to the filter. The airflow when the cyclone is activated through vacuum creates a cyclonic vortex, much like a liquid whirlpool, sucking the waste downwards and the shape of the cyclone and the size of the aperture (hole) in the capture drum  then prevents the majority of the particles from re-entering the vacuum flow and traveling back into the source of the vacuum, the power drum.

This process then allows the vacuum unit to operate for extended periods without the need to clean or replace the filter. The image below shows the approxiimate percentage of dust partiucles that stays in the capture drum and that travels through to the power drum and the filter. Not all cyclones work well. Spillrite uses cyclones that have been tested extensively in the field and we know they work.

  1. The SPAV has a powder coated anti-static metal silencer shroud bolted to an anti-static explosion proof alloy lid
  2. The chrome wand attached to the floor tool adds to the anti-static characteristics of the unit
  3. The unit comes with 3 metres of explosion proof smooth bore suction hose
  4. Metalic explosion proof anti-static fittinsg are used throughout the system
  5. A grounding chain is secured at the front of the trolley to allow a static dissipation path
  6. Metal couplings are used to atttach to the air fittings
  7. The lid is grounded to the stainless steel tank via metal clips
  8. The capture tank is stainless steel with a 60 litre capacity

THIS UNIT IS VACUUM ONLY WITH CYCLONE

Pneumatic Drum Vacuums are very SAFE. 

1. Cyclone - (anti-static resin) with integrated anti-static chain
2. Metal cyclone connection
3. Anti-static hose with helix
4. Steel capture tank
5. Air powered head - no moving
parts, no heating element
6. Metal fittings between cyclone head, tank and trolley
7. Steel power tank
8. Metal trolley
9. Metal grounding chain under platform
10. Enhanced anti-static grounding chain
fitted to cyclone

We build to order and ship within 3 business days
TURN YOUR OLD DRUM INTO A POWERFUL VACUUM SYSTEM. THE UNIT CAN BE CONFIGURED WITH REVERSE FILTER CLEANING.

TECHNICAL SPECIFICATIONS - DRY - REVERSE FILTER CLEAN WITH CYCLONE
AIR SUPPLY MIN 100 CFM
AIR SUPPLY FITTING 3/4 "
VACUUM FLOW 130 CFM
VACUUM RATING INCHES MERCURY 15" MAX
VACUUM RATING MILLIBARS 507 MB
FILL/PUMP OUT 44/55/205 DRUM 75 SECONDS
VENTURI TYPES TWIN RFC VENTURI'S
MAX SUCTION HOSE 1.5"/38MM 50 FEET / 15 METRES

 
DRY WASTE - Garnet, Wood Chips, Dust, Powders, Metal filings, Swarf, Plastics, Food waste, Soil, Gravel, Rubble
 

  1. The SPAV has a powder coated anti-static metal silencer shroud bolted to an anti-static explosion proof mild steel lid
  2. The chrome wand attached to the floor tool adds to the anti-static characteristics of the unit
  3. The unit comes with 3 metres of explosion proof smooth bore suction hose
  4. Metalic explosion proof anti-static fittings are used throughout the system
  5. A grounding chain is secured at the front of the trolley to allow a static dissipation path
  6. Metal couplings are used to atttach to the air fittings
  7. The lid is grounded to the stainless steel tank via metal clips
  8. The capture tank is stainless steel with a 60 litre capacity

Included in kit:

SPAV EXPLOSION PROOF VACUUM INCLUSIONS;

EX Power head fitted to MILD steel lid

Gasket to seal unit to tank

EX plastic cyclone with upgraded anti static features to allow Electro static dissipation (ESD)

EX camlock fittings

EX suction hose x 3 metres

EX wand and floor tool

EX Filter cartridge

3/4" Chicago air coupling with ball valve

Auto fluid shut off valves

Trolley with grounding chain