Do you ever get the impression that your vacuum is doing nothing more than spreading dirt? That is a huge warning sign that your vacuum needs some care. A clean ATEX certified pneumatic vacuum is most effective, much like most other appliances. Your vacuum runs slower and with less suction when it’s clogged with junk.
It might be simple to forget about routine maintenance for your industrial vacuum cleaner, especially if you have a tendency to believe that “If it ain’t broke, don’t fix it.”
Your commercial vacuum cleaner’s performance may suffer if you don’t do routine maintenance. When a vacuum isn’t used, it leaves behind dirt and particles, leaving a “dirty” clean. Ineffective cleaning puts employees’ and building users’ health and hygiene at risk.
Top 5 Vacuum Maintenance and Troubleshooting Tips
Proper maintenance can extend the life of ATEX certified cyclone vacuum cleaners. Maintenance also reduces the need for replacement parts. To improve cleaning efficiency, save money, and improve the appearance of the carpets and floors, give your vacuums some tender loving care.
Here are some tips for the maintenance of your ATEX certified pneumatic vacuum cleaner –
1. Change vacuum filters
The vacuum won’t operate as well as it should if the filters are not changed as directed or on schedule. Before using them, make sure to inspect them for damage or dirt accumulation. A filter should typically be changed in commercial vacuums and cleaning equipment every three months. The vacuum will require more frequent replacement if it is being utilized in locations with a lot of dust or debris.
2. Check vacuum brushes
Dust, hair, and other debris are easily entangled in the vacuum base and in the vicinity of the brushes. Brush debris can jam bearings and reduce how well your vacuum works. The brushes’ bristles ought to be in contact with the ground.
Regularly check the bristles and replace the brushes if they are no longer in contact with the floor. You may find detailed instructions on brush maintenance in your owner’s manual.
3. Adjust nozzle height
Airflow is what drives vacuums. On the lowest setting, if the nozzle is buried in the carpet, there is no airflow and your carpet is probably being harmed as a result. If your vacuum has a height adjustment feature, set it to the highest setting and then lower it till you hear the brush roll on the carpet pile.
Do not descend once there. This will provide optimum efficiency, prolonged belt and roller brush life, and protection of the carpeting.
4. Clean vacuum cord
The cord will acquire dirt in the same manner as the rest of the vacuum. Unplug the cord and spread it out completely to clean it. Clean the entire cord with a damp cloth and cleanser, then let it air dry. This will lessen the likelihood of dust and grime settling in your freshly cleaned area.
Always check the vacuum’s power wires before using them. It can be dangerous if the cord has cuts or kinks. For safety, replace damaged cords.
5. Schedule regular maintenance
One of the best pneumatic vacuum maintenance tips is to get your vacuum proper servicing. This can be done at home with the use of an air compressor or shop vacuum. Go over it, inspect the ducting, measure the bristles, change the belts and filters, and try it out.
We have the components you require and are always delighted to provide guidance. If DIY projects aren’t your thing, our vacuum service & maintenance is efficient and reasonably priced.
Conclusion
In conclusion, it is always preferable to be proactive rather than reactive when it comes to prolonging the life of the equipment and ensuring that it operates to its optimal standards. Keep up with routine maintenance for a clean that will satisfy your bottom line and not let you down.
Commercial ATEX certified cyclone vacuums require regular care and maintenance to ensure proper functioning. Therefore, following the above pneumatic vacuum maintenance tips can be really helpful in keeping your vacuum in top-notch condition.